Hp NonStop G-Series Manual de usuario descargar pdf (Pagina 58)

Switchovers

ServerNet Nomadic Disk User’s Guide—425485-001

5-4

Moving the Fiber Optic Switches to the Opposite

Position

Moving the Fiber Optic Switches to the Opposite

Position

A switch card determines the position of the fiber-optic switch: straight or crossed. To

move the fiber-optic switches to another position, do one of the following:

•

If you are using Nomadic Disk Manager, the GIVE command performs the

switching.

•

If you are not using Nomadic Disk Manager:

•

Issue commands from the Switch Command Interface (SWCI) to each switch.

See Section 6, Switch Command Interface (SWCI). The SWCI commands affect

the switch card only if the key switch on the switch controller card is set to the

REMOTE position.

•

Physically move the toggle switches. The toggle switches affect the switch card

only if the key switch on the switch controller card is set to the LOCAL

position.

Example 5-2. NDCONFIG on \BCK

SET PATH P $ MOD1.#A 1 CROSSED

SET PATH B $ MOD1.#A 2 CROSSED

SET PATH M $TRM1.#A 1 STRAIGHT

SET PATH MB $ TRM1.#A 2 STRAIGHT

SET VOL $DATA01

SET VOL $DATA02

SET VOL $DATA03

SET VOL $DATA04

SET VOL $DATA05

SET VOL $DATA06

SET VOL $DATA07

SET VOL $DATA08

ADD SEGMENT SEGMENT-1, DATA

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 145 146

Sin comentarios

Hp NonStop G-Series Manual de usuario Pagina 58