Hp ProLiant BL420c Gen8 Server Blade Manual de usuario descargar pdf (Pagina 9)

Component identification 9

Item Description

Enclosure connector

MicroSD card connector

FlexibleLOM connectors (2)

Processor socket 1 (populated)

Processor 2 DIMM slots

Internal USB connector

TPM connector

The symbols correspond to the symbols located on the interconnect bays. For more information, see the

HP ProLiant BL420c Gen8 Server Blade Installation Instructions on the HP website (http://www.hp.com/support).

System maintenance switch

Position Default Function

Off Off = iLO security is enabled.

On = iLO security is disabled.

Off Off = System configuration can be

changed.

On = System configuration is locked.

Off Reserved

Off Off = Power-on password is enabled.

On = Power-on password is disabled.

Off Off = No function

On = ROM reads system configuration

as invalid.

— Reserved

S10

—

Reserved

S11

— Reserved

S12

— Reserved

To access redundant ROM, set S1, S5, and S6 to on.

When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all

system configuration settings from both CMOS and NVRAM.

CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to

properly configure the server or data loss could occur.

Mezzanine connector definitions

A PCIe x8 mezzanine connector supports x16 cards at up to x8 speeds.

Item PCIe

Mezzanine connector 1

x8, Type A mezzanine card only

Mezzanine connector 2

x16, Type A or B mezzanine card

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 87 88

Comentarios a estos manuales

Sin comentarios

Hp ProLiant BL420c Gen8 Server Blade Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant BL420c Gen8 Server Blade