Hp ProLiant BL465c G7 Server-Blade Manual de usuario descargar pdf (Pagina 24)

Hardware options installation 24

IMPORTANT: This server blade does not support mixing RDIMMs and UDIMMs. Attempting to

mix these two types causes the server to halt during BIOS initialization.

To determine the Advanced ECC DIMM population order for each processor, use the following table and

"DIMM slot identification (on page 9)":

Population order DIMM slot

1st 1A

2nd 5B

3rd 3C

4th 7D

5th 2E

6th 6F

7th 4G

8th 8H

Installing DIMMs

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: Always wear an antistatic wrist strap when working inside the server.

1. Power down the server blade (on page 13).

2. Remove the server blade (on page 14).

3. Remove the access panel (on page 15).

4. Disconnect the cables, and then remove the DIMM baffle.

5. Open the DIMM slot latches.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 97 98

Sin comentarios

Hp ProLiant BL465c G7 Server-Blade Manual de usuario Pagina 24