Hp ProLiant BL685c Server-Blade Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 93
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Component identification 12
5.
Install the access panel (on page 15).
6. Install the server blade in the enclosure and power up the server blade.
7. After the system beeps, repeat steps 1 through 3.
8. Change positions 1, 5, and 6 of system maintenance switch to off.
9. Repeat steps 5 and 6.
If both the current and backup versions of the ROM are corrupt, return the system board for a service
replacement.
To switch to the backup ROM when the System ROM is not corrupt, use RBSU.
Local I/O cable
Item Connector Description
1 Server blade
For connecting to the local I/O cable
connector on the server blade front panel
2 Video For connecting a video monitor
3 USB For connecting up to two USB devices
4 Serial
For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 92 93

Comentarios a estos manuales

Sin comentarios