Hp ProLiant DL320 G5p Server Manual de usuario descargar pdf (Pagina 21)

Operations 21

Remove the server from the rack. For more information, see the documentation that ships with the

rack mounting option.

5. Place the server on a sturdy, level surface.

Remove the primary access panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

1. Power down the server (on page 20).

2. Remove the server from the rack (on page 20).

3. Loosen the captive T-15 Torx thumbscrew securing the access panel to the server.

4. Slide the access panel toward the rear of the server, then lift it from the server.

Remove the secondary access panel

1. Power down the server (on page 20).

2. Remove the server from the rack (on page 20).

3. Remove the primary access panel (on page 21).

4. Using a T-10 Torx screwdriver, remove the secondary access panel.

Remove the PCI riser board assembly

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser board assembly.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 105 106

Sin comentarios

Hp ProLiant DL320 G5p Server Manual de usuario Pagina 21