Hp ProLiant DL380 G3 Server Manual de usuario Pagina 23
- Pagina / 164
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Server Component Identification 23
System LED and
Color
Internal Health
LED Color
Status
Processor failure,
socket X (Amber)
Red One or more of the following conditions may exist:
•
•
•
•
•
Processor in socket X has failed.
Processor in socket X failed over to the offline spare.
Processor X is not installed in the socket.
Processor X is unsupported.
ROM detects a failed processor during POST.
Amber Processor in socket X is in a pre-failure condition.
Processor failure,
both sockets (Amber)
Red Processor types are mismatched.
PPM failure, slot X
(Amber)
Red •
•
PPM in slot X has failed.
PPM is not installed in slot X, but the corresponding
processor is installed.
DIMM failure, slot X
(Amber)
Red •
•
DIMM in slot X has failed.
DIMM in slot X is an unsupported type, and no valid
memory exists in another bank.
Amber •
•
•
DIMM in slot X has reached single-bit correctable
error threshold.
DIMM in slot X is in a pre-failure condition.
DIMM in slot X is an unsupported type, but valid
memory exists in another bank.
DIMM failure, all slots
in one bank (Amber)
Red No valid or usable memory is installed in the system.
Overtemperature
(Amber)
Red •
•
The Health Driver has detected a cautionary
temperature level.
The server has detected a hardware critical
temperature level.
Riser interlock
(Amber)
Red PCI riser cage is not seated.
Online spare memory
(Amber)
Amber Bank X failed over to the online spare memory bank.
Power converter
module (Amber)
Red Power converter module has failed.
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM
- User Guide 1
- Audience Assumptions 2
- Contents 3
- Server Features 9
- Front Panel Components 10
- Front Panel LEDs and Buttons 11
- Rear Panel Components 13
- Rear Panel LEDs and Buttons 15
- System Board Components 17
- System Maintenance Switch 18
- NMI Switch 18
- Chassis ID Switch 19
- DIMM Slots 19
- System Board LEDs 20
- Item LED Description Status 22
- Off = Normal 22
- SCSI Backplane Components 24
- SCSI Backplane LEDs 25
- PCI Riser Cage LED 31
- Remote Management Connector 31
- Identifying Hot-Plug Fans 32
- Hot-Plug Fan LED 33
- Power Converter Module LED 34
- Statuses (on page 35)." 35
- Server Operations 37
- Server Operations 39 39
- Removing the Access Panel 40
- Installing the Access Panel 40
- Removing the PCI Riser Cage 40
- Server Operations 41 41
- Server Operations 43 43
- Server Setup 45
- Rack Planning Resources 46
- Optimum Environment 47
- Temperature Requirements 48
- Power Requirements 49
- Rack Warnings 50
- Server Setup 51 51
- Installing Hardware Options 52
- Server Setup 53 53
- Server Setup 55 55
- Server Setup 57 57
- Server Setup 59 59
- Server Setup 61 61
- Registering the Server 63
- Introduction 65
- Processor Option 65
- 6. Install the processor 67
- Memory Options 69
- DIMM Installation Guidelines 70
- Installing DIMMs 71
- SCSI IDs 72
- Removing a Hard Drive Blank 73
- Hot-Plug Tape Drive Option 75
- 3. Install the tape drive 76
- Redundant Hot-Plug Fans 79
- Installation Requirements 81
- DC Power Supply Option 87
- Expansion Board Options 91
- Server Cabling 99
- HP CONFIDENTIAL 100
- PCI Simplex SCSI Cabling 101
- PCI Duplex SCSI Cabling 102
- Server Cabling 103 103
- CD-ROM Drive Cabling 105
- Diskette Drive Cabling 106
- Power Button/LED Cabling 106
- Server Cabling 107 107
- RILOE II Cabling 108
- Internal Power Cabling 108
- External Storage Cabling 109
- ROM-Based Setup Utility 111
- Using RBSU 112
- Auto-Configuration Process 116
- Boot Options 117
- Redundant ROM Support 119
- ROMPaq Utility 120
- USB Support 121
- SmartStart Software 122
- SmartStart Scripting Toolkit 123
- Drivers 124
- Management Agents 125
- Insight Manager 7 125
- Automatic Server Recovery-2 126
- Survey Utility 126
- Integrated Management Log 126
- Server Error Messages 130
- Diagnostic Steps 132
- Problems After Initial Boot 137
- ROMPaq Disaster Recovery 139
- Other Information Resources 140
- Battery Replacement 141
- FCC Rating Label 144
- Class A Equipment 144
- Class B Equipment 145
- Modifications 146
- Mouse Compliance Statement 146
- European Union Notice 147
- Japanese Notice 148
- BSMI Notice 148
- Laser Device Notices 148
- Laser Safety Warnings 149
- Laser Product Label 149
- Battery Replacement Notice 150
- Electrostatic Discharge 151
- Discharge 152
- Server Specifications 153
- Environmental Specifications 154
- Technical Support 155
- Acronyms and Abbreviations 157
- Wake on LAN 160
Relacionado con productos y manuales para Hardware De La Computadora Hp ProLiant DL380 G3 Server
(14 paginas)
(187 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales