Hp ProLiant DL585 Server Manual de usuario descargar pdf (Pagina 108)

Server Configuration and Utilities

HP ProLiant DL585 Server User Guide 5-11

Integrated Lights-Out technology

Integrated Lights-Out (iLO) is a standard component of selected ProLiant servers that

provides server health and remote server manageability. The iLO subsystem includes

an intelligent microprocessor, secure memory, and a dedicated network interface.

This design makes iLO independent of the host server and its operating system. The

iLO subsystem provides remote access to any authorized network client, sends alerts,

and provides other server management functions.

Using iLO, you can:

• Remotely power up, power down, or reboot the host server

• Send alerts from iLO, regardless of the state of the host server

• Access advanced troubleshooting features through the iLO interface

• Diagnose iLO using HP Systems Insight Manager (HP SIM) through a Web

browser and SNMP alerting

For more information about iLO features, refer to the Integrated Lights-Out User

Guide on the Documentation CD or on the HP website at

http://www.hp.com/servers/lights-out.

Integrated Lights-Out ROM-Based Setup Utility

HP recommends using iLO RBSU to configure and set up iLO. iLO RBSU is

designed to assist you with setting up iLO on a network; it is not intended for

continued administration.

To run iLO RBSU:

1. Restart or power up the server.

2. Press the F8 key when prompted during POST. The iLO RBSU runs.

3. Select Administer User Accounts>Configure iLO Settings. Enter a valid iLO

user ID and password with the appropriate iLO privileges Default account

information is located on the iLO Default Network Settings tag.

4. Make and save any necessary changes to the iLO configuration.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 182 183

Sin comentarios

Hp ProLiant DL585 Server Manual de usuario Pagina 108