Hp ProLiant ML10 Server Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Hardware options installation 27
c.
Remove the heatsink from the processor backplate.
13. Install the drive bracket:
a. Place the drive bracket flush against the wall of the chassis, and then slide it fully to the front of the
chassis.
b. From outside of the chassis, use two shoulder screws to secure the drive bracket to the chassis front.
14. Connect the system fan cable and the 24 pin power cable to the system board connectors.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

Comentarios a estos manuales

Sin comentarios