Hp ProLiant ML10 Server Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Hardware options installation 39
4.
Place the server on the side.
5. Remove the access panel (on page 12).
6. Open the DIMM slot latches.
7. Install the DIMM.
8. Install the access panel (on page 14).
9. Return the server to an upright position.
10. Connect the power cord to the server.
11. Connect the power cord to the power source.
12. Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 75 76

Comentarios a estos manuales

Sin comentarios