
upgrading and servicing the pc (2)
133
6 Remove the screw (A) on each side of the diskette drive.
A
NOTE: The second screw (A) is on the other side of the drive cage (not
pictured).
7 Pull the diskette drive out.
To install a new diskette drive:
1 Slide the diskette drive into the drive cage, until the two screw holes align.
2 Attach the screws on each side of the drive cage.
To reassemble the computer:
1 Replace the drive cage (see “replacing the drive cage” on page 141).
2 Reattach the cables to the back of the hard and diskette drives.
3 Replace the side panel (see “replacing the side panel” on page 144).
4 Reconnect the power cord and all other cables.
5 Reconnect the modem/telephone cable.
6 Turn on the computer and all peripherals.
Comentarios a estos manuales