
A–8 edge switch 2/16 product manager user guide
Product Manager Messages
Internal file transfer error
received from switch.
Switch detected an internal
file transfer error.
Contact support personnel.
Invalid character in field. Invalid character in the input
field.
Re-enter the field
information.
Invalid configuration name. Attempted to save an
address configuration name
with an invalid name.
Use up to 24 alphanumeric
characters, including
spaces, hyphens and
underscores.
Invalid feature key. The feature key was not
recognized.
Re-enter the feature key
noting the key is case
sensitive and to include the
dashes.
Invalid firmware file. Selected file is not a
firmware file.
Select the correct firmware
file.
Invalid network address. Network address specified
is not known by the domain
name server.
Check the input address
and specify the correct
network address.
Invalid port address. Invalid port address has
been entered.
Verify port address through
the Configure - “Active”
dialog box (S/390 mode
only) and re-enter.
Invalid port number. Port number must be within
the range of ports for the
specific switch model.
Enter a port number within
the correct range.
Invalid port number. Valid
ports are (0 - 15).
Port number must be within
the range of ports for the
specific switch model. For
this model, the valid port
numbers are 0 - 15.
Enter a port number within
the correct range.
Invalid port swap. Port swap selection is not
allowed.
Ensure that each port
selected for swap has not
been previously swapped.
Invalid response received
from switch.
The switch returned an
invalid response.
Resend the firmware. If the
condition persists, contact
support personnel.
Table A–1: HP StorageWorks Edge Switch 2/16 Product Manager Messages
Message Description Action
Comentarios a estos manuales