
A–10 edge switch 2/16 product manager user guide
Product Manager Messages
Link dropped. Connection between HAFM
server and the switch has
been lost.
Wait for the connection to
re-establish. Link
re-connects are attempted
every 30 seconds.
Log is currently in use. Log is in use by another
Product Manager.
Retry the operation later.
Loopback plug(s) must be
installed on ports being
diagnosed. Press Next to
continue.
External loopback
diagnostics require an
optical loopback plug to be
installed.
Ensure that an optical
loopback plug is installed in
port optical transceiver
before running external
wrap diagnostic testing.
Maximum number of
versions already installed.
The maximum number of
firmware versions has been
reached.
Delete a firmware version
before adding a new
firmware version.
No file was selected. Action requires you to select
a file
Select a file.
No firmware version file was
selected.
A file was not selected in the
Firmware Library dialog box
before an action, such as
modify or send was
performed.
Click a firmware version in
the dialog box to select it,
then perform the action
again.
No firmware versions to
delete.
There are no firmware
versions in the firmware
library to delete.
N/A. An informational
message.
Non-redundant switch must
be offline to install firmware.
Since the switch has only a
single CTP card, it must be
offline to initiate a firmware
installation.
Take switch offline and try
again.
Not all of the optical
transceivers are installed for
this range of ports.
Some ports in the specified
range do not have optical
transceivers installed.
Use a port range that is valid
for the ports installed.
Performing this operation
will change the current state
to Offline.
This operation causes the
switch to go offline.
N/A. An informational
message.
Table A–1: HP StorageWorks Edge Switch 2/16 Product Manager Messages
Message Description Action
Comentarios a estos manuales