HP AD583C Manual de usuario descargar pdf (Pagina 100)

100 Serial and Ethernet pin assignments

DB-9 pin assignments

In conjunction with the pin assignments provided for the 3-pin receptacle on the rear panel of the HP

e1200-320 4Gb Interface Card, following are the corresponding pin out assignments for a DB-9 serial

connector used to connect the other end of the serial cable to a terminal, or a computer running terminal

emulation software.

The pin assignments given in Figure 78 for the DB-9 serial connection are in reference to the serial

connector at the end of the cable. Use an RS-232 null modem cable to connect the HP e1200-320 4Gb

Interface Card to the host system.

NOTE: To connect the Interface interface card to a host system, use the RS-232 Serial3-Pin-to-DB-9 cable

included in the shipping container for this product.

Figure 78 Corresponding pin outs of the DB-9 connector

Table 10 DB-9 connector description

Number Description

1 No connection

2RX data (Receive)

3 TX data (Transmit)

4 No connection

5 Signal ground

6 No connection

7 RTS (Request to Send), not used

8 CTS (Clear to Send), not used

9 No connection

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 131 132

Sin comentarios

HP AD583C Manual de usuario Pagina 100