HP Jetdirect 2700w USB Wireless Print Server Manual de usuario descargar pdf (Pagina 9)

3. When prompted, reboot the printer. This will enter the printer into Wireless Conguration mode.

4. From the Home screen on the printer control panel, select the wireless icon and select Print. For 4–

line displays, print a ‘How to Connect’ page from the main menu.

NOTE: If a USB error is displayed on the control panel, then make sure the latest printer rmware is

installed.

. Check the printed page to make sure the HP Jetdirect is successfully connected.

NOTE: Connected HP Jetdirects can be found on the How to Connect page, or on the Conguration

page under the Installed Personalities and Options section.

●

If an HP Jetdirect 2700w entry is listed and a wireless network icon is displayed on the printer’s

control panel, the HP Jetdirect installed correctly.

●

If an HP Jetdirect 2700w entry is not listed, or a wireless network icon is not displayed on the

printer’s control panel, check that the power cable and USB cable are securely connected to the

HP Jetdirect and to the printer.

Step four: Enable wireless printing

Follow one of the methods below to enable wireless printing on the printer and the HP Jetdirect:

Method one: Enable wireless printing in the Embedded Web Server (EWS)

NOTE: After connecting the HP Jetdirect, the printer defaults to Wireless Conguration mode. This is

indicated on the control panel by Wireless Configuration. Follow the steps below to complete the

conguration. After completing the conguration, reboot the printer to exit Wireless Conguration mode.

1. Make sure the printer is connected (wired) to the local network using the printer’s embedded

HP Jetdirect connection.

NOTE: If the printer is not connected to a wired network, then connect the PC/laptop directly to the

printer using an Ethernet cable (not provided).

2. Get the wireless network name (SSID), security level, and password from your system administrator.

NOTE: The wireless network SSID is dierent from the HP Jetdirect SSID or printer SSID.

3. Open the HP Embedded Web Server (EWS).

a. Open a Web browser.

b. In the address eld, type the HP Jetdirect 2700w IP address or host name exactly as it displays on

the conguration or ‘How to Connect’ page, and then press Enter.

4. Run the Wireless Wizard.

a. Select the Networking tab.

b. Select Wireless Station from the left pane.

NOTE: The Wireless page displays all the 802.11 wireless conguration parameters required to

create a wireless connection to the local network.

ENWW Step four: Enable wireless printing 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Sin comentarios

HP Jetdirect 2700w USB Wireless Print Server Manual de usuario Pagina 9