HP AlphaStation DS20 Guía de instalación descargar pdf (Pagina 16)

Linux Installation and Configuration Guide for AlphaServer 16

ECG513/0100

7. After you have completed modifying the /etc/fstab file, you will need to be initialize it with

the command mkswap /dev/sda3. The changes will take effect after the system is rebooted.

8. To configure the X window System type: sax

Following the prompts answering the questions appropriately for your system. Once this process

is completed, you should be able to run the command "startx" to make use of the graphical

interface.

9. Type: shutdown –h now

Post-Installation

System Resource Manager Configuration

Now make the final configuration changes to be able to boot directly from the disk, instead of the

floppy or CD-ROM. You should now be at the SRM prompt, ">>>". Enter the following

commands to finalize the configuration.

You need to enter these commands, such that the drive reference on the second line needs to refer

to the drive which you installed to:

>>>set boot_file 2/boot/vm_full.gz

>>>set bootdef_dev dka0

>>>set boot_osflags "root=/dev/sda2"

At the SRM prompt, you can now boot directly from the hard drive:

>>>boot

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Sin comentarios

HP AlphaStation DS20 Guía de instalación Pagina 16