HP AlphaStation DS20 Guía de instalación descargar pdf (Pagina 42)

Linux Installation and Configuration Guide for AlphaServer 42

ECG513/0100

/dev/sda3 swap swap defaults 0 0

7. After you have completed modifying the /etc/fstab file, you will need to be initialize it with

the command mkswap /dev/sda3. The changes will take effect after the system is rebooted.

8. To configure the X window System type: sax

Following the prompts answering the questions appropriately for your system. Once this process

is completed, you should be able to run the command "startx" to make use of the graphical

interface.

9. Type: shutdown –h now

Post-Installation

System Resource Manager Configuration

Now will make the final configuration changes to be able to boot directly from the disk, instead

of the floppy or CD-ROM. You should now be at the SRM prompt, ">>>". Enter the following

commands to finalize the configuration.

You need to enter these commands:

>>>set boot_file 2/boot/vm_full.gz

>>>set bootdef_dev dka0

>>>set boot_osflags "root=/dev/sda2"

At the SRM prompt, you can now boot directly from the hard drive:

>>>boot

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 55 56

Sin comentarios

HP AlphaStation DS20 Guía de instalación Pagina 42