HP Compaq dc73 Manual de usuario

Altiris Deployment Solution Guide for Blade Workstation Clients using Embedded OS 9.xx or 10.xx Part number: 467809-002 Second edition: June 2008

Installing Altiris Deployment Solution 10 4. The next step is to download the Linux and Free DOS Automation Environment for Deployment Solution

Installing Altiris Deployment Solution 11 3-2 Installing Altiris Deployment Solution To install Altiris Deployment Solution, perform the followin

Installing Altiris Deployment Solution 12 3-3 Installing the 9x sample jobs A number of Deployment Solution sample jobs are available on the clie

Installing Altiris Deployment Solution 13 3-6 Client computer boot order For all imaging operations described in this guide, the client computer b

Preparing the PXE boot file for the HP dc73 Blade Workstation Client 14 4 Preparing the PXE boot file for the HP dc73 Blade Workstation Client W

Figure 4-1: Process to create the PXE Automation Boot Image for the HP dc73 Blade Workstation ClientStart the PXE Configuration UtilityClick on “New”

Using Altiris Deployment Solution 16 5 Using Altiris Deployment Solution This chapter describes how to use Altiris Deployment Solution—specifical

Download to eXpresseXpressdirectoryAltiris ImageRead the End User License Agreementand indicate whether or not you agree.IMPORTANT: If multiple Altiri

Using Altiris Deployment Solution 18 5-2 Capturing an OS image Capturing the Embedded OS 9.xx or 10.xx image is the process of copying the OS ima

eXpressdirectory9xCaptureCloneClick on9xCaptureCloneto view its tasks.Viewing the9xCaptureClone JobExecuting the9xCaptureClone JobDrag the computer to

2 © Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warran

eXpressdirectory9xCaptureOSClick on9xCaptureOSto view its tasks.Viewing the9xCaptureOS JobExecuting the9xCaptureOS JobDrag the computer tothe 9xCaptur

Using Altiris Deployment Solution 21 5-3 Deploying an OS image Deploying an OS image is the process of installing the Embedded OS 9.xx image from

eXpressdirectory9xDeployDrag the computerto the 9xDeploy job.Select the desired scheduleand click “OK”.Figure 5-7 9xDeploy — Deploy the completeOS f

eXpressdirectory9xDeployKeepingSettingsDrag the computer to the9xDeployKeepSettings job.Select the desired scheduleand click “OK”Figure 5-8 9xDeployK

Using Altiris Deployment Solution 24 5-4 9xApplySiteSettings The 9xApplySiteSettings job is a single-step job that copies the settings_20_site.tx

Modifying SettingsChange settings, for example, monitor_blank_time=60. The modified settingis applied automatically at the next boot.Select the image

Troubleshooting tips 26 6 Troubleshooting tips This chapter provides tips to aid in troubleshooting issues with operation of the Altiris Deployme

Troubleshooting tips 27 6-2 Issues and suggestions Issue Suggestion HW/SW versions affected by this issue e1000 error message in automation mode

Troubleshooting tips 28 Invalid volume error during capture/deploy On HP Embedded OS versions previous to 9.40, e2fsck must be run on partition 5

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 29 Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key This appendix d

Contents 3 Contents 1 Introduction 1-1 Client documentation...

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 30 5. After downloading is complete, you’ll be prompted for one of the following

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 31 7. Click Next, follow the softpaq instructions, and click Finish on the last s

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 32 9. To copy the image file to the USB key, run dskimg32.exe, with the image fi

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 33 A-2 Example installation from the USB key In this section, an example installa

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 34 4. The next screen will give you the option to set site-wide default settings

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 35 7. The next screen enables you to select the networking protocol (see Figure

Appendix A: Installing Embedded OS 9.xx or 10.xx from a USB key 36 10. Use the arrow keys to select Done on the Local Settings screen—this initi

Figures 4 Figures Figure 2-1 Download of Altiris image to the eXpress directory ...

Introduction 5 1 Introduction This guide provides information that you will need to download, capture, and deploy Embedded OS 9.xx or 10.xx on the

Altiris Deployment Solution overview 6 2 Altiris Deployment Solution overview This chapter provides an overview of the Altiris Deployment Solutio

Altiris Deployment Solution overview 7 2-1-2 Capture Capturing an OS image is the process of transferring the OS image from the client computer to

Altiris Deployment Solution overview 8 2-2 Two-step operations Using the three building blocks described previously, the following two-step opera

Installing Altiris Deployment Solution 9 3 Installing Altiris Deployment Solution This chapter describes how to download and install the Microsof