HP Compaq dc73 Manual de usuario descargar pdf (Pagina 15)

Figure 4-1: Process to create the PXE Automation Boot Image for the HP dc73 Blade Workstation Client

Start the PXE Configuration Utility

Click on “New”

Provide the desired name for

the PXE boot option, select

the items shown below, and

click “Create Boot Image”.

Enter a detailed description

if desired, and click “Next”.

The next step is to fetch the required

boot drivers from the Altiris website.

Click “Internet” on the dialog below.

Select: Altiris_verified/DS 6.8 SP2 (2.6.18.8)/x86

A browser window is

automatically brought up

pointing to the FTP site below:

After closing the browser

window, this dialog is

brought up automatically.

Use the “Add Driver” button

to add the first of the three

required Linux drivers

For the 2

and 3

drivers, click the “Have Disk…”

button in the “Step 2 of 11” dialog shown above.

Specify the driver module path and click “OK” for

each of the two remaining drivers. After all three

drivers have been loaded, select (highlight) all

drivers

that are noted as custom

in the “Source” column below.

Shown below is highlighting of the e1000.ko driver.

Click “Next” after all custom drivers have been highlighted.

start

here

Step 3 of 12 allows the driver load order

to be changed. Set the following order:

1. SCSI

2. SATA

3. e1000

Click “OK” after

specifying the

path/file name

of the 1st driver.

Ensure that the IP address

is obtained from a DHCP

server and click “Next”.

Enter the IP address of

the Altiris Deployment

Server, select Remote,

and click “Next”.

Enter the Workgroup

or Domain name, enter

the User name and

Password of the

Altiris file server, then

click “Next”.

Provide the information

required by the client to

access the image files

on the server, then click

“Next”.

Step 8 of 12:

Review the

configuration

summary,

click “Next”

if OK.

Step 8 of 12:

Review the

configuration

summary,

click “Next”

if OK.

If needed, customize the configuration

by adding and editing files.

Click “Next”

Immediately upon selecting multiple custom

drivers, the number of steps is incremented to

12 (was 11) to account for this additional step

of changing the driver load order.

Click “Finish”

Click “OK” when the above

dialog re-appears

From these 3 folders, save

the ahci.ko, ata_piix.ko, and

e1000.ko files to a local folder.

Click “Next”

Ensure that “Next Device (BIOS/EFI)”

is first

in the list. Use the Up/Down

keys to position “dc73Linux” second

in the list, then click “OK”.

Select the “DS” (Deployment Server)

tab and select “dc73Linux (32-bit)”

from the pull-down menu. Click “OK”.

This is where

the PXE image

is created.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comentarios a estos manuales

Sin comentarios

HP Compaq dc73 Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo HP Compaq dc73