HP Compaq dc73 Manual de usuario descargar pdf (Pagina 12)

Installing Altiris Deployment Solution 12

3-3 Installing the 9x sample jobs

A number of Deployment Solution sample jobs are available on the client software website to implement common

capture and deployment tasks. To install the sample jobs for Embedded OS 9.xx, perform these steps:

1. Based on your client computer, go to one of the following websites:

• HP Blade Workstation Client: http://www.hp.com/support/bwclient

• HP dc72 Blade Workstation Client: http://www.hp.com/support/dc72

• HP dc73 Blade Workstation Client: http://www.hp.com/support/dc73

2. Click Download drivers and software.

3. Click Workstation Blade Client Embedded OS, and scroll down to the Software section.

4. Scroll down the list of client software to the following sample jobs file:

Altiris Deployment Solution Sample

Jobs for Microsoft Windows Systems

(9xHPBladeWorkstationClientJobs.bin)

5. To view details of the sample jobs, click on the description. To download the sample jobs, click on Obtain

software, and save the 9xHPBladeWorkstationClientJobs.bin file to your hard drive.

6. Bring up the Deployment Solution console. In the Jobs pane, right click the Samples folder, and select

Import. Browse to the 9xHPBladeWorkstationClientJobs.bin file saved in step 5, and select it.

Figure 3-5 shows the 9.xx sample jobs that are imported.

Figure 3-5 Embedded OS 9.xx sample jobs

3-4 Installing the 10x sample jobs

The 10x sample jobs are installed in the same manner as the 9x sample jobs described in the previous section,

except that the 10x sample jobs are labeled as follows:

Altiris Deployment Solution Sample

Jobs for Microsoft Windows Systems

(10xHPBladeWorkstationClientJobs.bin)

3-5 Prerequisites for using the 9x or 10x sample jobs

The following requirements must be met in order to use the 9x or 10x sample jobs supplied by HP:

• The client computers must be on the same subnet as the Altiris Deployment Server.

• There can only be one PXE server per subnet.

• The client computers must already have Embedded OS version 9.40 or newer installed.

• If you are using Embedded OS 8.xx, you must run e2fsck immediately before every activity that happens

at the automation console prompt. Failure to clean the partition after every reboot will result in an Altiris

'Invalid Volume' error.

• Each client must have a static Altiris Deployment Server IP address assigned, or be on a network configured

to allow the Client to detect the server IP using multicasting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Sin comentarios

HP Compaq dc73 Manual de usuario Pagina 12