HP NetServer LXr 8500 Manual de usuario

Busca en linea o descarga Manual de usuario para Barebones Pc / Estación De Trabajo HP NetServer LXr 8500. HP NetServer LXr 8500 with HP Rack Storage/12FC & HP Rack Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
1
HP NetServer LXr 8500
with
HP Rack Storage/12FC & HP Rack Storage/12
Microsoft Windows 2000 Advanced Server
Cluster Configuration Guide
29 January 2001
(see Versions at the end of this document)
Introduction
This document defines the configurations that Hewlett-Packard supports for the HP NetServer LXr 8500, HP Rack
Storage/12FC and Microsoft Cluster Server. These configurations minimize single points of failure (SPOF,
SPOFless
1
) and provide extended availability. The specific configuration certified and supported by both
Hewlett-Packard and Microsoft is defined, as are other guidelines to assist you in configuring your clustered
NetServers. This guide is prescriptive; it describes the configurations supported by HP. Any deviance to these
configurations can result in an inoperative cluster or an operating cluster with degraded performance, hidden
SPOFs, etc., and therefore will not be supported by HP.
What's Defined in a Racked Cluster
Cluster
SPUs
Local and Shared Storage
Intra-cluster and Client LANs
Shared Storage Cabling
Cluster
Type of SPUs HP NetServer LXr 8500
Each node must be the same model SPU, but may have different clock
speeds, main memory sizes, cache sizes, and number of CPUs.
Number of nodes 2
Shared Storage HP Rack Storage/12FC with 2 FCArray Cards, HP disks, and a HP D8602A
or D8602B HBA in each server. See Shared Storage below.
LANs:
Client LAN Any NIC that is HP and Microsoft approved. See Client LAN below.
For a SPOFless cluster, two D5013B NICs configured with AFT is
recommended.
1
For more information about configuring a SPOFless cluster, refer to the HP white paper, High Availability MSCS
Cluster Solution on the HP NetServers, HA Planning website.
Vista de pagina 0
1 2 3 4 5 6 7 8 9

Indice de contenidos

Pagina 1 - 29 January 2001

1HP NetServer LXr 8500with HP Rack Storage/12FC & HP Rack Storage/12Microsoft Windows 2000 Advanced ServerCluster Configuration Guide29 January 20

Pagina 2

2 Intra-cluster (Heartbeat) LANHP D5013B with crossover cable, or, configure as a VLAN through anEthernet switch. See Intra-cluster LAN below.P

Pagina 3

3 No. of HBAs 1 Driver D8602A - Hhba5100.sys 2.06D8602B – Afcw2k.sys 3.0.3245.1 RAID level 0, 1, 3, 5, 10For SPOFless configurations a faul

Pagina 4 - Shared Storage Cabling

4Model HP NetServer Rack Storage/12 - D5989B or Cplus two D6025B or two D6025C SCSI cards for each cabinetStatus SCSI ID 5 (fixed)Disk SCSI IDs 0 – 3,

Pagina 5

5HP Microsoft Cluster (SPOF) using HP Rack Storage/12FC and Rack Storage/12and 6 Port Fibre Channel HubNOTES1. The HBA and NICs are depicted in PCI s

Pagina 6

6Power Cabling to Separate Power Circuits (SPOF)(For SPOFless with 2 hubs, connect second hub to PDU that first hub is not attached to)

Pagina 7

7HP SPOFless Microsoft Cluster using HP Rack Storage/12FC and Rack Storage/12and two 6 Port Fibre Channel HubsNOTES1. The HBA and NICs are depicted i

Pagina 8

8 HP SPOFless Microsoft Cluster using HP Rack Storage/12FC and Rack Storage/12with Direct ConnectionsNOTES1. The HBA and NICs are depicted in PCI slo

Pagina 9 - Versions

9Versions29 January 2001 Added D8602B and D6025C cards.7 November 2000 Added SPOFless notes and diagrams.17 October 2000 Revised intro, boot spec and

Comentarios a estos manuales

Sin comentarios