HP ProLiant Generation ML310 Especificaciones descargar pdf (Pagina 39)

Removal and replacement procedures 39

Removing a DIMM

1. Power down the server (on page 26).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Unlock the tower bezel.

4. Remove the access panel ("Access panel" on page 31).

5. Remove the air baffle ("Air baffle" on page 32).

6. Open the DIMM slot latches.

7. Remove the DIMM.

To replace the component, reverse the removal procedure.

Heatsink

To remove the component:

1. Power down the server (on page 26).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Unlock the tower bezel.

4. Remove the access panel ("Access panel" on page 31).

5. Remove the air baffle ("Air baffle" on page 32).

6. Remove the heatsink:

a. Loosen one pair of diagonally opposite screws halfway, and then loosen the other pair of screws.

b. Completely loosen all screws in the same sequence.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 90 91

Sin comentarios

HP ProLiant Generation ML310 Especificaciones Pagina 39