HP ProLiant Generation ML310 Especificaciones descargar pdf (Pagina 42)

Removal and replacement procedures 42

5. Remove the air baffle ("Air baffle" on page 32).

6. Remove the heatsink ("Heatsink" on page 39).

CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,

especially the contact area.

CAUTION: The pins on the processor socket are very fragile. Any damage to them may require

replacing the system board.

7. Open the processor locking lever, and then open the processor retaining bracket.

8. Grasp the processor by the edges, and then lift it out of the socket.

To replace the component:

CAUTION: Failure to completely open the processor locking lever prevents the processor from

seating during installation, leading to hardware damage.

CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To

avoid damage to the system board:

• Do not touch the processor socket contacts.

• Do not tilt or slide the processor when lowering the processor into the socket.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 90 91

Sin comentarios

HP ProLiant Generation ML310 Especificaciones Pagina 42