HP Visualize c3000 Manual de instrucciones Pagina 190

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 246
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 189
190 Chapter6
The Boot Console Interface
Changing the Console to an External Terminal
Changing the Console to an External Terminal
In the event that your console stops displaying to your graphics device,
use the following procedure to display the console to an external serial
terminal so that you can configure the graphics console:
1. Turn the system’s power off.
2. Disconnect the USB keyboard connector from the system rear panel.
3. Connect a serial terminal to the “Serial 1” connector on the system
back panel. Configure the terminal for: 9600 baud, No Stop Bits, No
Parity, 8 Bits.
4. Power on the system.
The system will now display the console to the terminal connected to
Serial 1 port.
Vista de pagina 189
1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 245 246

Comentarios a estos manuales

Sin comentarios