HP Vizualize,Visualize b2000 Especificaciones descargar pdf (Pagina 64)

64 Chapter2

Parts Replacement Procedures

Voltage Regulator Modules (VRMs)

2. Remove the four power supply T-15 Torx screws and slide the supply to unlatch from

the support bracket. Without disconnecting the power cables, move the supply to the

side.

Figure 2-54. Power Supply T-15 Torx Screws

3. Press outward on the ejector tabs located on each side of the VRM connectors. See

Figure 2-55.

NOTE The top connector from the chassis ﬂoor is the master; while the bottom

connector is the slave.

Figure 2-55. VRM Ejector Tabs

4. Firmly grasp the master VRM and pull outward from the system board connector.

5. Firmly grasp the slave VRM and pull outward from the system board connector.

T-15 Torx Screws

(quantity 4)

Ejector

Tabs

Ejector

Tabs

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 86 87

Sin comentarios

HP Vizualize,Visualize b2000 Especificaciones Pagina 64