HP C6100 Manual de usuario descargar pdf (Pagina 58)

To set the answer mode

➔

Press Auto Answer to turn the light on or off, as appropriate for your setup.

When the Auto Answer light is on, the HP All-in-One answers calls automatically.

When the light is off, the HP All-in-One does not answer calls.

Set the number of rings before answering

If you turn on the Auto Answer setting, you can specify how many rings should occur

before the HP All-in-One automatically answers the incoming call.

The Rings to Answer setting is important if you have an answering machine on the same

phone line as the HP All-in-One, because you want the answering machine to answer

the phone before the HP All-in-One does. The number of rings to answer for the HP All-

in-One should be greater than the number of rings to answer for the answering machine.

For example, set your answering machine to a low number of rings and the HP All-in-

One to answer in the maximum number of rings. (The maximum number of rings varies

by country/region.) In this setup, the answering machine will answer the call and the

HP All-in-One will monitor the line. If the HP All-in-One detects fax tones, the HP All-in-

One will receive the fax. If the call is a voice call, the answering machine will record the

incoming message.

To set the number of rings before answering from the control panel

1. Press Setup.

2. Press

to highlight Basic Fax Setup and press OK.

3. Press

to highlight Rings to Answer and then press OK.

4. Enter the appropriate number of rings by using the keypad, or press

or to

change the number of rings.

5. Press OK to accept the setting.

Change the answer ring pattern for distinctive ringing

Many phone companies offer a distinctive ringing feature that allows you to have several

phone numbers on one phone line. When you subscribe to this service, each number

will have a different ring pattern. You can set up the HP All-in-One to answer incoming

calls that have a specific ring pattern.

If you connect the HP All-in-One to a line with distinctive ringing, have your telephone

company assign one ring pattern to voice calls and another ring pattern to fax calls. HP

recommends that you request double or triple rings for a fax number. When the HP All-

in-One detects the specified ring pattern, it will answer the call and receive the fax.

If you do not have a distinctive ring service, use the default ring pattern, which is All

Rings.

To change the distinctive ring pattern from the control panel

1. Verify that the HP All-in-One is set to answer fax calls automatically.

2. Press Setup.

3. Press

to highlight Advanced Fax Setup, and then press OK.

4. Press

to highlight Distinctive Ring, and then press OK.

5. Press

to highlight the appropriate option, and then press OK.

When the phone rings with the ring pattern assigned to your fax line, the HP All-in-

One answers the call and receives the fax.

Basics Guide 55

Fax setup

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 117 118

Comentarios a estos manuales

Sin comentarios

HP C6100 Manual de usuario Pagina 58

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo HP C6100