HP Value Serial/USB Receipt Printer II Manual de usuario Pagina 78
- Pagina / 155
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3: Programming Commands78
2 = Transmit RS-232C Busy Status
Bit Status Hex Decimal Function
0 O 00 0 Fixed to o.
1 On 02 2 Fixed to on.
2 O 00 0 Cover closed.
On 04 4 Cover open.
3 O 00 0 Paper feed button is not pressed.
On 08 8 Paper feed button is pressed.
4 On 10 16 Fixed to on.
5 O 00 0 Printing not stopped due to paper condition.
On 20 32 Printing stopped due to paper condition.
6 O 00 0 No error condition.
On 40 64 Error condition exists in the printer.
7 O 00 0 Fixed to o.
3 = Transmit error status
Bit Status Hex Decimal Function
0 O 00 0 Fixed to o.
1 On 02 2 Fixed to on.
2 O 00 0 Fixed to o.
3 O 00 0 No knife error.
On 08 8 Knife error occurred.
4 On 10 16 Fixed to on.
5 O 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
6 O 00 0 Thermal printhead temp. and power supply voltage are in range.
On 40 64 Thermal print head temp. or power supply voltage are out of range.
7 O 00 0 Fixed to o.
4 = Transmit receipt paper status
Bit Status Hex Decimal Function
0 O 00 0 Fixed to o.
1 On 02 2 Fixed to on.
2 O 00 0 Paper adequate.
On 04 4 Paper low (if paper low sensor enabled).
3 O 00 0 Paper adequate.
On 08 8 Paper low (if paper low sensor enabled).
4 On 10 16 Fixed to on.
5 O 00 0 Paper present.
On 20 32 Paper exhausted.
6 O 00 0 Paper present.
On 40 64 Paper exhausted.
7 O 00 0 Fixed to o.
- HP Value Serial/USB 1
- Receipt Printer II 1
- Contents 3
- Start-up Diagnostics 9
- Runtime diagnostics 10
- Remote diagnostics 10
- A798IIDiagnosticsForm 11
- Indicators 12
- Printer conguration 13
- Conguring the printer 14
- Diagnostics modes 16
- Printer emulations 17
- Overview of commands 20
- Comparison to A793 20
- Character appearance 22
- Print zones 22
- Emulation modes 23
- Commands listed by function 24
- Text characteristics 25
- Graphics 26
- Real time 27
- Bar codes 27
- Command conventions 30
- Command descriptions 30
- Perform partial knife cut 31
- Generate tone 31
- Initialize printer 32
- Select cut mode and cut paper 33
- Print test form 34
- Port Idle Timeout 34
- Print and paper feed 35
- Feed n dot rows 36
- Add n extra dot rows 36
- Print and feed paper 37
- Print and feed n lines 37
- Horizontal tab 38
- Set column 38
- Set vertical line spacing 40
- Set horizontal tab positions 40
- Set relative print position 41
- To move to the left: 41
- Select justication 42
- Set left margin 42
- Set printing area width 43
- Text characteristics commands 44
- Select pitch (column width) 45
- Select print mode 46
- 47
- Cancel user-dened character 49
- Select or cancel italic print 50
- Select character size 54
- Set smoothing 55
- Download font list 57
- Congure use of font set 57
- Congure line spacing 57
- Double-byte fonts 58
- Select font ID number 59
- Select font style number 59
- Select bit image mode 61
- Turn on/o TIFF compression 61
- Select the current logo 63
- Dene downloaded bit image 64
- Print downloaded bit image 65
- Print raster graphics 65
- Print Flash Logo 66
- Dene Flash Logos 66
- Logo print with knife cut 66
- Enable constant speed logos 67
- Batch mode 68
- Transmit paper sensor status 69
- Transmit printer ID 69
- Transmit status 74
- Real time commands 75
- Preferred implementation 76
- Alternate implementation 76
- Moving data through the buer 76
- Real time status transmission 77
- Real time request to printer 79
- Real time commands disabled 80
- Automatic Status Back 81
- Ifn=0,ASBisdisabled 82
- Unsolicited status mode 84
- Store symbol data for QR Code 88
- Print symbol data for QR code 89
- Transmit QR code print size 90
- Select bar code height 92
- Print bar code 92
- Print multiple barcodes 94
- 29 107 n d1... 00 95
- 29 107 m nL nH d1... dn 95
- Sample symbol description: 97
- Select bar code width 97
- Set DataMatrix Parameters 98
- Set DataMatrix module size 99
- Page mode 102
- Select page mode 103
- Select standard mode 104
- Set print area in page mode 105
- Execute macro 107
- User data storage 108
- Flash object area pack 109
- Flash object delete 109
- Return ash area size 110
- Flash download 111
- Switch to ash download mode 112
- Return main program ash CRC 112
- Download application 113
- Reset rmware 113
- Settings commands 114
- Set diagnostics mode 115
- Enable or disable knife 115
- Set max power 115
- Set printer emulation 116
- Set partial cut distance 116
- Set default font 116
- Set font size 117
- Set printer ID mode 119
- Set vertical white space 120
- Set printer tone 120
- Set shutdown mode timeout 120
- Appendix A: 121
- Appendix B: 126
- Resident Character Sets 126
Relacionado con productos y manuales para Impresión y escaneo HP Value Serial/USB Receipt Printer II
(110 paginas)
(166 paginas)
(16 paginas)
Impresión y escaneo HP AMP 130 Printer Manual de usuario
(128 paginas)
(128 paginas)
(193 paginas)
(62 paginas)
(209 paginas)
(146 paginas)
(144 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales