
Sign up for updates
hp.com/go/getupdated
Share with colleagues
Rate this document
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Intel is a trademark of Intel Corporation in the U.S. and other countries.
799827-001, Created October 2014
Degradation
In the unlikely event that one of your hard drives malfunctions, you will be notified with the following message:
If this occurs, perform the following steps:
1. Run the Intel Rapid Storage Console application on the system experiencing a degradation to identify the hard drive
that failed and to which port it is connected.
2. After identifying the hard drive, close all applications, shut down the operating system, power down the unit, unplug
the power cord, and replace the defective hard drive.
3. After replacing the hard drive, automatic rebuild of the redundancy begins immediately after the system is powered up
and operating system starts. The following message appears:
End of procedure.
Comentarios a estos manuales