HP RP7 Retail System Model 7100 Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
Technical white paper | AHCI and RAID on HP EliteDesk and EliteOne 800 Business PCs
5
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>
3. Reboot the computer.
4. Enter F10 Setup and change SATA Emulation mode to AHCI.
5. Reboot the computer into the OS.
An existing Windows 7 or Windows 8 image using the native AHCI driver can be updated to use the Intel AHCI driver
(iastor.sys). The driver can be downloaded from hp.com .
Note
Be careful when moving an image to computer with a different chipset. The Device ID of the AHCI controller must match
what is in the INF or the AHCI driver will fail and the computer will not boot.
Hardware
HP rp7800, rp5810, and rp5800 Retail Systems use Intel chipsets that support an AHCI-capable Host Bus Adapter (HBA).
This HBA supports ATA and ATAPI devices in both PIO and DMA modes with NCQ as long as the device supports NCQ.
All hard drives shipped with the HP rp7800, rp5810, and rp5800 Retail Systems are NCQ capable.
Limitations
NCQ functionality requires both HBA and hard drive to support it. Non-NCQ capable hard drives will not see any performance
benefits even though the HBA is NCQ capable.
Hot-plugging is not possible in an operating system without an AHCI driver that supports hot-plugging, such as DOS,
Windows 9x, Windows NT4.0, and older versions of Linux.
Changing AHCI to IDE Mode through the HP Replicated Setup Utility: Multiple AHCI systems can be reverted back to IDE mode
using the HP Replicated Setup Utility. This utility allows for system BIOS settings to be replicated and distributed throughout
an enterprise. The procedures and information about how to obtain the Replicated Setup Utility are described in the HP
white paper “UEFI BIOS Tools for HP Business Desktops” available at
http://h10032.www1.hp.com/ctg/Manual/c02932801.pdf .
Basic RAID Types
This section provides a brief explanation of the supported RAID configurations for HP rp7800, rp5810, and rp5800 Retail
Systems.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 26 27

Comentarios a estos manuales

Sin comentarios