HP StorageWorks Enterprise File Services WAN Accelerator Guía de usuario Pagina 115

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 124
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 114
HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 109
10 - SERIAL CLUSTER AND
C
ASCADE DEPLOYMENTS
A Basic Serial
Cluster
Deployment
The following example illustrates how to configure a cluster of three in-path HP EFS
WAN Accelerators in a data center.
Figure 10-2. Serial Cluster in a Data Center
This example has the following parameters:
HP EFS WAN Accelerator1 IP address is 10.0.1.1 on a /16
HP EFS WAN Accelerator2 IP address is 10.0.1.2 on a /16
HP EFS WAN Accelerator3 IP address is 10.0.1.3 on a /16
Each HP EFS WAN Accelerator is configured with in-path peering rules that prevent
peering with another HP EFS WAN Accelerator in the cluster and with in-path rules
that do not optimize connections originating from these HP EFS WAN Accelerators.
To configure HP EFS
WAN Accelerator1
1. On HP EFS WAN Accelerator1, connect to the CLI. For detailed information, see
the HP StorageWorks Enterprise File Services WAN Accelerator Command-Line
Interface Reference Manual.
2. At the system prompt, enter the following set of commands:
SH1 > enable
SH1 # configure terminal
SH1 (config) # in-path peering rule pass peer 10.0.1.2 rulenum 1
SH1 (config) # in-path peering rule pass peer 10.0.1.3 rulenum 1
SH1 (config) # in-path rule pass-through srcaddr 10.0.1.2/32 rulenum 1
SH1 (config) # in-path rule pass-through srcaddr 10.0.1.3/32 rulenum 1
SH1 (config) # wr mem
SH1 (config) # show in-path peering rules
Rule Type Source Network Dest Network Port Peer Addr
----- ------ ------------------ ------------------ ----- --------------
-
1 pass * * * 10.0.1.3
2 pass * * * 10.0.1.2
def auto * * * *
SH1 (config) # show in-path rules
Rule Type Source Addr Dest Addr Port Target Addr
Port
----- ---- ------------------ ------------------ ----- ---------------
-----
1 pass 10.0.1.3/32 * * -- --
2 pass 10.0.1.2/32 * * -- --
def auto * * * -- --
Vista de pagina 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 123 124

Comentarios a estos manuales

Sin comentarios