Hp Digital Sender Flow 8500 fn1 Document Capture Work Manual de usuario Pagina 87

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 110
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 86
Install a Jetdirect card
To install a Jetdirect card, follow these steps.
1. Press the Power button to turn off the product (1), disconnect power from the product (2), and then
disconnect the Ethernet cable (3).
2. Loosen the two screws which secure the Jetdirect card cover plate to the back of the product (1),
and then remove the cover plate (2) and set it aside.
3. Remove the replacement Jetdirect card from its packaging and insert the card into the card slot
ledge-side up, as shown.
a. Align the card with the guide rails in the slot.
b. Firmly press the card into the slot until the card is seated (2), and then secure the card with
the card plate screws (1).
ENWW
Install a Jetdirect card
79
Vista de pagina 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 109 110

Comentarios a estos manuales

Sin comentarios