HP INTEGRITY RX3600 Manual de usuario descargar pdf (Pagina 43)

held for at least four seconds. The following values are reset to factory defaults when the button

is held for at least four seconds:

• Serial terminal baud rate settings

• User names and passwords

Core I/O Board Ports

Table 1-6 lists a description of the core I/O board ports shown in Figure 1-14.

Table 1-6 Core I/O Board Ports

DescriptionPort

LAN port dedicated for remote access to the iLO 2 MP10 Base-T/100 Base-T LAN

Local serial portAuxiliary Serial

Local serial port that provides a console connection to the serverConsole Serial (iLO 2 MP)

Two public USB 2.0 ports used primarily to connect to a keyboard and mouse

for console input functions (Windows and Linux operating systems only)

USB

VGA port used primarily to connect to a monitor that displays console output

(Windows and Linux operating systems only)

VGA (optional)

iLO 2 MP Status LEDs

Table 1-7 shows the states and status of the iLO 2 MP status and LAN LEDs.

Table 1-7 iLO 2 MP Status and LAN LEDs

StatusStatesiLO 2 MP LED

Standby power is onSolid greenStandby power

iLO 2 MP self test running

Amber

iLO 2 MP Self test

Self test completedOff

Operational and functionalFlashing greeniLO 2 MP Heartbeat

Operational and functionalFlashing greenBMC Heartbeat

ActivityBlinking green

Link Status Link with no activitySolid green

No linkOff

100 Mb linkSolid amber

Link Speed

10 Mb linkOff

1 The LED is solid amber when ac power is first applied. It remains solid amber for a few seconds until the iLO 2 MP

completes its self test; the LED then turns off.

System LAN

The system LAN functionality is provided by the LAN core I/O card. The ports on the LAN core

I/O card are two RJ-45 style 10 Base-T/100 Base-T/1000 Base-T system LAN ports:

Table 1-8 show the system LAN link status and speed LEDs states and status.

Controls, Ports, and LEDs 43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 355 356

Sin comentarios

HP INTEGRITY RX3600 Manual de usuario Pagina 43