HP DL380 Guía de instalación descargar pdf (Pagina 32)

To quic kly setup iLO 2 using the default settings for iLO 2 Standard and

iLO 2 Advanced features, follow the steps b elow.

1. Ensure that a network cable is connected to the iLO 2 port (1) located

on the back of the storage server.

gl0085

Figure8iLO2connectorport

NOTE:

This connection method is easiest when the connection is

to a DHCP and DNS supported network.

2. If not using dynamic DHCP (IP addressing), you will need to input a

static IP address by using the direct attach method and the iLO 2 RBSU.

3. Using the methods described in the HP Integrated Lights–Out 2 User

Guide,connecttotheiLO2port.

NOTE:

To ﬁnd the default iLO 2 log in settings, see the iLO 2

Default N etwork Settings card attached to your server. The

default DNS, administrator name, and password needed

tologinwillbeonthiscard.

4. If desired, you can change the default user name and password on

the administrator account to your predeﬁned selections.

5. Setupyouruseraccounts,ifusingthelocalaccountsfeature.

6. Activate iLO 2 advanced features by entering a license ke y from the

included ProLiant Essentials Integrated Lights-Out 2 Advanced Pack.

7. Access the HP ProLiant Data Protection Storage Server using the iLO 2

Remote Console functionality. Log in to the HP ProLiant Data Protection

Storage Server with the default user name administrator and the

password hpinvent. The HP ProLiant Data Protection Storage Ser ver

Management console star ts automatically.

Accessing the HP Data Protection Storage Server M anagement

console

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

HP DL380 Guía de instalación Pagina 32