HP ProDesk 490 G2 Especificaciones descargar pdf (Pagina 55)

WLAN module

Description

HP WLAN 802.11 a/b/g/n + Bluetooth 4.0

Intel Dual Band Wireless-N 7260NB 802.11 a/b/g/n 2x2 WiFi + BT4.0

You can install a WLAN module using a PCIe expansion card. The module is secured to the expansion card

with two Phillips screw and has two connected antennas.

To remove the WLAN module:

1. Prepare the computer for disassembly (

Preparation for disassembly on page 25)

2. Remove the access panel (

Access panel on page 26)

3. If replacing a WLAN module, remove the PCIe card that houses the module (

Expansion cards

on page 32). Go to step 4.

- or -

If installing a WLAN module, connect the module to the PCIe card, and then install the PCIe card in the

computer (

Expansion cards on page 32). Go to step 7.

4. To remove a WLAN module, disconnect the antenna cables from the module (1).

WLAN module 45

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 159 160

Sin comentarios

HP ProDesk 490 G2 Especificaciones Pagina 55