HP ProLiant BL280c G6 Especificaciones rápidas descargar pdf (Pagina 13)

NOTE:

For additional Core Options and Additional Options please see options sections below.

HP Ethernet Mezzanine

Options

Gigabit Ethernet Mezzanines

HP NC325m PCI Express Quad Port 1Gb Server Adapter

416585-B21

HP NC326m PCI Express Dual Port 1Gb Server Adapter

406771-B21

HP NC360m Dual Port 1GbE BL-c Adapter

445978-B21

HP NC364m Quad Port 1GbE BL-c Adapter

447883-B21

HP NC382m Dual Port 1GbE Multifunction BL-c Adapter

453246-B21

HP BLc QLogic iSCSI Dual Port Adapter with Virtual Connect Kit

488074-B22

NOTE:

The Gigabit Ethernet adapters above transmit from the server only at

2000 Mbps, full duplex per port. For more information, see the "Network

Controller" segment in the Standards Features section for more information.

10 Gigabit Mezzanines

HP NC532m Dual Port Flex-10 10GbE BL-c Adapter

NOTE:

The NC532m network adapter card is required for each server blade

connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000

Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)

NOTE:

The NC532m requires a minimum of 2 GB of server memory.

NOTE:

The NC532m supports linking at 1000Mbps when not connected to a

Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.

467799-B21

HP NC522m Dual Port 10GbE Multifunction BL-c Adapter

NOTE:

The NC522m requires a minimum of 2 GB of server memory.

NOTE:

The NC522m supports linking at 1000Mbps or 10000Mbps when not

connected to a Flex-10 enabled module and will link with all current 1Gb

switches at 1Gb.

467801-B21

HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter

NOTE:

The NC542m network adapter card is required for each server blade

connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000

Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)

NOTE:

The NC542m requires a minimum of 2 GB of server memory.

NOTE:

The NC542m supports linking at 1000Mbps or 10000Mbps when not

connected to a Flex-10 device. The NC542m will only support 1000Mbps when

connected to a 1Gb Ethernet interconnect.

539857-B21

HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter

NOTE:

The NC550m network adapter card is required for each server blade

connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000

Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)

NOTE:

The NC550m requires a minimum of 2 GB of server memory.

NOTE:

The NC550m supports linking at 1000Mbps or 10000Mbps when not

connected to a Flex-10 device. The NC550m will only support 1000Mbps when

connected to a 1Gb Ethernet interconnect.

581204-B21

HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter

NOTE:

The NC551m network adapter card is required for each server blade

connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000

Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)

NOTE:

The NC551m requires a minimum of 2 GB of server memory.

NOTE:

The NC551m supports linking at 1000Mbps or 10000Mbps when not

connected to a Flex-10 device. The NC551m supports 1000Mbps when

connected to a 1Gb Ethernet interconnect.

580151-B21

NOTE:

The ROM Based Setup Utility (RBSU) feature allows for the configuring

of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to

FCoE (Fibre Channel over Ethernet). Note that a HP Virtual Connect profile

takes precedence over the setting in this menu. Also, some FlexFabric Adapters

may require that network boot be enabled in order to configure the protocol. If

the protocol is configured without enabling network boot with certain FlexFabric

Adapters, the protocol may not take effect. Once the protocol has taken effect on

the first boot after configuring this option, network boot may be disabled if

desired.

HP Fiber Channel

Mezzanine Options

4Gb Fibre Channel Mezzanines

Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem

403621-B21

QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem

403619-B21

8Gb Fibre Channel Mezzanines

HP BLc Emulex LPe1205- 8Gb FC HBA for HP c-Class BladeSystem

456972-B21

QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem

451871-B21

Brocade 804 8Gb FC HBA for HP BladeSystem c-Class

590647-B21

QuickSpecs

HP ProLiant BL280c Generation 6 Server Blade

Core Options

DA - 13294 Worldwide QuickSpecs — Version 14 — 8-16-2010

Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

QuickSpecs 1

Comentarios a estos manuales

Sin comentarios

HP ProLiant BL280c G6 Especificaciones rápidas Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores HP ProLiant BL280c G6