HP ProLiant Smart Array E200 Guía de usuario descargar pdf (Pagina 8)

Component identification 8

Item Description

8 Hard drive bay 3

9 Hard drive bay 2

10 Hard drive bay 1

*An optional controller is required when the server is configured with six hard drives.

Front panel LEDs and buttons

Item Description Status

Power On/Standby button

and system power LED

Green = System is on.

Amber = System is shut down, but power is still applied.

Off = Power cord is not attached, power supply failure has

occurred, no power supplies are installed, facility power is not

available, or disconnected power button cable.

2 UID button/LED Blue = Identification is activated.

Flashing blue = System is being remotely managed.

Off = Identification is deactivated.

3 Internal health LED Green = System health is normal.

Amber = System health is degraded. To identify the component in

a degraded state, refer to "HP Systems Insight Display and LEDs"

("HP Systems Insight Display and LEDs" on page 12).

Red = System health is critical. To identify the component in a

critical state, refer to "HP Systems Insight Display and LEDs" ("HP

Systems Insight Display and LEDs" on page 12).

Off = System health is normal (when in standby mode).

External health LED

(power supply)

Green = Power supply health is normal.

Amber = Power redundancy failure occurred.

Off = Power supply health is normal when in standby mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 117 118

Sin comentarios

HP ProLiant Smart Array E200 Guía de usuario Pagina 8