HP Server rp8400 Guía de instalación descargar pdf (Pagina 64)

Chapter 5

System Installation

Setting Up the CE Tool (PC)

The CE Tool is usually a laptop. It allows communication with the Management Processor (MP) in the server.

The MP monitors the activity of either a one partition or a multiple partition configuration.

During installation, communicating with the MP enables such tasks as:

• Verifying that the components are present and installed correctly

• Setting LAN IP addresses

• Shutting down cell board power

Communication with the MP is established by connecting the CE Tool to the Local RS-232 port on the Core

I/O card.

Setting CE Tool Parameters

After powering on the CE Tool, ensure the communications settings are as follows:

• 8/none (parity)

• 9600 baud

• None (Receive)

• None (Transmit)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 93 94

Sin comentarios

HP Server rp8400 Guía de instalación Pagina 64