HP Server rp8400 Guía de instalación descargar pdf (Pagina 78)

Chapter 5

System Installation

Verifying the System Configuration

At this point in the installation process, the hardware is set up, the Management Processor (MP) is connected

to the LAN, the AC and DC power have been turned on, and the selftest is completed. Now the configuration

can be verified.

After DC is powered on and the selftest is completed, the BCH prompt appears (Main Menu: Enter command

or menu>).

1. Enter di to display a list of the Boot Console Handler (BCH) commands.

2. To display the Information Menu (to check the configuration), enter in.

3. Check the following parameters, by selecting the corresponding command from the menu, to verify that

what the customer ordered is what the customer received.

• PR (Processor)

• ME (Memory)

• IO (Check the “PCI Device Information” to determine if the values match the devices installed in the

I/O chassis.)

Use the MA command to return to the BCH Main Menu once the parameters have been checked.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 93 94

Sin comentarios

HP Server rp8400 Guía de instalación Pagina 78