HP NAS 8000 Clustered Solution Manual de usuario descargar pdf (Pagina 73)

Configuring Your System and Network 71

Configuring Your System and

Network

Defining Email Alerts (SMTP)

The NAS server lets you automatically notify individuals via email if there is a

hardware failure or a critical system alert.

Note The information on this screen is optional. Blank fields do not

affect the functionality of the device. In the event of a hardware

failure or system alert, messages are sent through the network

management tool or they are logged in the system log.

To set up automatic notification:

1 In the Command View NAS web interface, click the Configuration tab.

2 Navigate down the tree to Alerts/Logging, then select SMTP Email Alerts.

3 Select Actions > Edit SMTP Values.

4 Enter the name of the email server in the SMTP Server Name field. The

email server must be an IP address or a fully qualified name (such as

alpha.corp.com). You must specify an email server if you want to define

one or more email recipients.

5 Click Add and enter the email address that should receive alerts. Click OK.

Click Add for any additional email addresses you want to add. You can

also:

— Edit an existing email by selecting it from the table and clicking Edit.

— Delete an entry by selecting it from the table and clicking Delete.

6 Click OK.

7 You can send a test email to make sure your settings are correct by

selecting the recipient from the list and clicking Actions > Send test email

to selected address.

See Appendix B, SNMP Trap Definitions for a list of the traps sent by the NAS

server.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 239 240

Sin comentarios

HP NAS 8000 Clustered Solution Manual de usuario Pagina 73