Hp Unified Extensible Firmware Interface Manual de usuario descargar pdf (Pagina 16)

Setting the Embedded Serial Port

You can assign a logical COM port address and associated default resources to the selected

physical serial port. The operating system can overwrite this setting.

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→System Options→Serial Port Options→Embedded Serial Port and press Enter.

2. Select one of the following options:

• COM 1: IRQ4: I/0: 3F8h-3FFh (default)

• COM2: IRQ3: I/0: 2F8h-2FFh

• Disabled

3. Press F10 to accept your selection.

Figure 6 Serial Port Options — Embedded Serial Port screen

Setting the Virtual Serial Port

You can assign a logical COM port address and associated default resources used by the Virtual

Serial Port (VSP). VSP lets the iLO Management Controller appear as a physical serial port to

support the BIOS Serial Console and the operating system serial console.

1. From the System Utilities screen, select System Configuration→BIOS/Platform Configuration

(RBSU)→System Options→Serial Port Options→Virtual Serial Port and press Enter.

2. Select one of the following options:

• COM 1: IRQ4: I/0: 3F8h-3FFh

• COM2: IRQ3: I/0: 2F8h-2FFh (default)

• Disabled

3. Press F10 to save your selection.

16 Accessing the System Configuration Menu

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 157 158

Sin comentarios

Hp Unified Extensible Firmware Interface Manual de usuario Pagina 16