Hp 2000I G2-Modular-Smart-Array Manual de usuario descargar pdf (Pagina 32)

32 Connecting hosts

The 2312i Modular Smart Array and 2324i Modular Smart Array use Unified LUN Presentation (ULP) — a

controller firmware feature enabling hosts to access mapped volumes via host ports — without the need for

internal or external switches.

Connecting direct attach configurations

The 2312i G2 and 2324i G2 support up to four direct-connect server connections, two per controller.

Connect appropriate cables from the servers’ HBAs to the controller host ports as shown in the following

illustrations.

Single controller configuration

One server/one HBA/single path

Dual controller configurations

One server/one HBA/dual path

Two servers/one HBA per server/dual path

Connecting remote management hosts

The management host directly manages systems out-of-band over an Ethernet network.

1. Connect an Ethernet cable to the network port on each controller.

2. Connect the other end of each Ethernet cable to a network that your management host can access

(preferably on the same subnet).

NOTE: Connections to this device must be made with shielded cables with metallic RFI/EMI connector

hoods in order to maintain compliance with FCC Rules and Regulations.

Server 1

Server 1 Server 2

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Sin comentarios

Hp 2000I G2-Modular-Smart-Array Manual de usuario Pagina 32