Hp 60-Modular-Smart-Array Manual de usuario descargar pdf (Pagina 17)

Setup 17

Use a No. 2 Phillips screwdriver to remove the standard pins from the front and back ends of the

rail.

4. Install four round-hole pins into the rail.

5. Repeat steps 3 and 4 for the second rail.

Installing a storage enclosure into the rack

To install the storage enclosure into the rack:

1. Secure the front end of the rails to the rack.

IMPORTANT: Do not remove the pins from the ends of the rack rails unless you are converting the rails for

use in round-hole racks. These load-bearing pins are designed to fit through the holes without being

removed.

IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend

through the holes marked with the template.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Sin comentarios

Hp 60-Modular-Smart-Array Manual de usuario Pagina 17