Hp StorageWorks 1510i Modular Smart Array Manual de usuario descargar pdf (Pagina 16)

5. Wait a few moments for the utility to load.

NOTE:

When accessing the SMU for the ﬁrst time, a window is displayed requiring input of a

user-deﬁned username and password.

6. One of the following happens:

• If key components of the system are unconﬁ gured,aprompttogototheWizardtabis

displayed. (For more information, see “Wizards”onpage69.)

• If the system is partially conﬁgured, the Conﬁgure tab is displayed. (For more information,

see “Conﬁgure”onpage25.)

•Ifthesystemisconﬁgured, the View tab is displayed. (For more information, see

“Diagnose” on page 77.)

Changing the management port IP address through the

MSA1510i controller display panel

When the MSA1510i is initially installed and powered on, an IP address is automatically assigned to

the primary management port (usually MA0). Depending on your network conﬁguration,thisdefaultIP

address may not be accessible by the network servers.

To change the IP address of the MSA1510i management port to be in the same LAN segment as the

network servers, do the following:

1. Access the controller LCD panel management menu. Press the right (>) navigation button on the

front of the active controller (usually the front-right controller.) Network Settings should be displayed

and blinking.

LCD panel navigation buttons work as follows:

Navigation button In the menu Within a menu option

Right (>) Select a blinking menu option.

When changing IP address

settings, move to the next digit.

Up/Down (^/v)

Scroll through the menu options.

Change/Toggle a setting.

Left (<)

Not applicable.

Accept the displayed setting and

return to the initial management

menu display.

16 O ve rvi ew

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 98 99

Sin comentarios

Hp StorageWorks 1510i Modular Smart Array Manual de usuario Pagina 16