Hp StorageWorks 2.32 Edge Switch Manual de usuario descargar pdf (Pagina 73)

Setting Up the Application

73HA-Fabric Manager User Guide

Figure 27: Domain Information dialog box (Community Strings tab)

5. Click an option in the Read field.

— Choose Default ‘public’ to select the default string.

— Choose Custom to specify a custom string.

6. Click an option in the Write field.

— Choose Default ‘private’ to select the default string.

— Choose Custom to specify a custom string.

7. If you chose Custom in step 5 or step 6, continue to step 8. Otherwise, skip to

step 10.

8. Enter the custom string in the Custom field.

9. Enter the string again in the Confirm Custom field.

10. Click OK.

11. Click OK to close the Discover Setup dialog box.

Reverting to a Default Community String

1. Choose Discover > Setup. The Discover Setup dialog box displays, as shown

in Figure 25 on page 70.

2. Highlight an IP address from the Available Addresses table.

3. Click Add. The Domain Information dialog box displays, as shown in

Figure 26 on page 71.

4. Click the Community Strings tab. The Community Strings tab displays, as

shown in Figure 27 on page 73.

5. Click Default ‘public’ and Default ‘private’.

6. Click OK.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 299 300

Sin comentarios

Hp StorageWorks 2.32 Edge Switch Manual de usuario Pagina 73