Hp StorageWorks 2.32 Edge Switch Manual de usuario Pagina 147
- Pagina / 228
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Edge Switch Element Manager user guide 147
Embedded Port Log (Advanced log)
This log provides a detailed history log of all traffic passing through the embedded port. The
Embedded Port (EP) of the switch is a single physical FC port within the hardware architecture that is
used to communicate FC frames between devices attached to the external ports and the embedded
firmware’s FC services software, based on the use of well-known Fibre Channel addresses. This is
similar to the function of the Control Unit Port (CUP) in FICON architecture. The CUP is implemented
via the EP for FICON traffic. The Embedded Port Log will log all FC frame traffic directed to the
switch (EP), including discards, frames not routed, and traffic designated for the EP (in-band traffic),
as shown in Figure 65
10540 System PLOGI/FLOGI WWPN
Mismatch
Informational
10541 System PLOGI/FLOGI WWNN
Mismatch
Informational
10550 System Nameserver: Device
Deregistration
Change
10551 System Nameserver: WWPN
Registration
Change
10552 System Nameserver: WWNN
Registration
Change
10553 System Nameserver: WWPN
Registration for another Device
-- Invalid Operation attempted
Error
10553 System Nameserver: WWNN
Registration for another Device
-- Invalid Operation attempted
Error
Table 7 Security log reason codes (continued)
Security Log Reason
Code
Security Log Category
(event type)
Description Trigger Level
(severity level)
- HP StorageWorks 1
- Contents 3
- About this guide 11
- Rack stability 13
- HP technical support 13
- Helpful web sites 14
- 1 Element Manager overview 15
- Element manager description 16
- Element Manager overview18 18
- Feature keys 19
- Using the Element Manager 23
- Opening the Element Manager 24
- Opening the Online Help 25
- Window layout and function 26
- Configure menu 27
- Element Manager overview28 28
- Element Manager overview30 30
- Logs menu 31
- Maintenance menu 32
- View tabs 33
- Hardware view 34
- Port List view 36
- Node List view 37
- Performance view 38
- FRU List view 40
- Status bar 41
- Closing the Element Manager 42
- What is backed up? 42
- Backing Up to a CD 42
- Restoring data from a CD 43
- Manual backup procedures 43
- Element Manager overview44 44
- Monitoring switch operation 46
- Monitoring hardware operation 47
- Displaying FRU information 49
- Displaying port information 50
- Port properties parameters 50
- Displaying switch information 54
- Using menu options 55
- Port menu 56
- Node List view menu options 63
- Displaying node properties 63
- Bar graph display 66
- Port statistics 66
- Class 2 Statistics 67
- Class 3 Statistics 67
- Error statistics 67
- Operational statistics 68
- Troubleshooting tips 69
- Button functions 69
- Port operational states 71
- Port Indicators 72
- Port State Green Amber Alert 72
- Description 72
- Link incident alerts 74
- Threshold alerts 75
- 3Configuring the switch 77
- Configuring identification 78
- Configuring management style 79
- Switch parameters 80
- Rerouting delay 81
- Domain RSCNs 81
- Configuring fabric parameters 82
- Fabric Parameters 82
- Configuring preferred path 84
- Common features about tabs 86
- Using the Users tab 88
- Assigning users to a switch 88
- Adding a new user 89
- Configuring the switch90 90
- Using the Software tab 91
- Enabling API authentication 92
- Configuring the switch94 94
- Using the Devices tab 95
- Configuring the switch96 96
- Adding a detached switch 98
- Configuring the switch100 100
- Adding a new IP address 102
- Using the Radius Servers tab 104
- Authentication 105
- Viewing the Security Log 106
- Configuring switch binding 107
- Configuring ports 107
- Configuring the switch108 108
- Configuring the switch110 110
- Configuring the switch112 112
- Port address parameters 114
- Configuring port addresses 116
- Configuring the switch118 118
- Configuring Port Addresses 119
- Configuring an SNMP agent 120
- Configuring the feature key 122
- Configuring date and time 124
- Configuring threshold alerts 126
- Creating new alerts 127
- Configuring the switch128 128
- Configuring the switch130 130
- Modifying alerts 131
- Viewing alerts 131
- Configuring Open Trunking 132
- Enabling and disabling Telnet 133
- Configuring the switch134 134
- 4Using logs 135
- Log options and functions 136
- Saving a log file 137
- Expanding columns 137
- Sorting entries 137
- Audit Log 138
- Event Log 139
- Hardware Log 141
- Link Incident Log 142
- Threshold Alerts Log 143
- Open Trunking Log 143
- Security Log 144
- Using logs148 148
- Change button 149
- Using logs150 150
- 5 Using maintenance features 151
- Running port diagnostics 152
- Swapping ports 152
- Using maintenance features154 154
- Collecting maintenance data 155
- Executing an IPL 156
- Setting online state 157
- Managing firmware versions 158
- Enabling e-mail notification 158
- Backing-up configuration 159
- Restoring configuration 159
- Resetting the configuration 160
- Using maintenance features162 162
- 6 Optional features 163
- Preferred path 164
- Changing a preferred path 166
- Removing a preferred path 166
- Optional features168 168
- FICON Management Server 169
- Optional features170 170
- Germany/Austria 00273 0111 170
- Brazil 00275 0113 170
- Italy 00280 0118 170
- SANtegrity features 172
- Switch Binding 173
- Optional features174 174
- Optional features176 176
- Enterprise Fabric Mode 177
- Open Trunking 178
- Optional features180 180
- Flexport feature 182
- HAFM Application messages 184
- Element Manager messages 200
Relacionado con productos y manuales para Almacenamiento Hp StorageWorks 2.32 Edge Switch
(150 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.181 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales