Hp StorageWorks 2.32 Edge Switch Manual de usuario descargar pdf (Pagina 89)

Edge Switch Element Manager user guide 89

A default user is set up in the switch user base. The ID of the user is Administrator and the

password is password. There is one default user that is displayed in the table, with both Telnet and

HAFM Basic (EWS) check boxes selected.

Adding a new user

To add a new user, do the following:

1. Click Add.

The Add/Edit User dialog box is displayed (Figure 25).

Figure 25 Add/Edit User dialog box

2. Define all the fields.

User ID must be unique. If you add an ID that exists in the system, it will be rejected. The

maximum length of password is 24 characters.

3. Click OK.

4. Assign a role to a user to be either Administrator or Operator.

By default, all new users are set up with an Administrator’s privilege. This can be changed by

clicking the list under the Role column and selecting another option.

The security administrator can delete users from the switch user database. There must be at least one

user with Administrator privilege for Telnet and HAFM Basic. A message is displayed if you try to

delete the last user with Administrator privileges.

If a user is removed from the table, the user cannot access the switch through the Telnet or HAFM

Basic interface. The removed user who is currently accessing a live session with the switch can

continue working on the switch until logging out.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 227 228

Sin comentarios

Hp StorageWorks 2.32 Edge Switch Manual de usuario Pagina 89