Hp StorageWorks XP Remote Web Console Software Manual de usuario Pagina 46
- Pagina / 98
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
46 LUN Manager for the XP128/XP1024
NOTE: High-speed (2 port) mode is available only if the XP disk array has firmware version 21.06.22 or
later installed.
The following icons are used to indicate status:
Port table
The Port table displays information about the ports in the selected CHA packages. The information in this
table differs depending on the type of channel adapter package selected in the tree.
The table lists the following for Fibre Channel CHA packages:
• Port Name: Displays port names
• Type: Fibre indicates a Fibre Channel port, used for connecting open system hosts. MF-Serial indicates
an ESCON
® port, used for connecting mainframe hosts.
• Host Speed: Specifies the data transfer speed for Fibre Channel ports. If Auto is selected, the disk array
automatically sets the data transfer speed to 1 GB/sec or 2 GB/sec.
• Addr (Loop ID): Displays addresses of ports. You can change port addresses.
• Fabric: Specify ON if a fabric switch is used, or OFF if no fabric switch is used
• Connection: Specifies the topology. The default is FC-AL. Some fabric switches require you to specify
point-to-point topology. Check the switch’s documentation.
• Attribute: Indicates whether the port is an initiator port, target port, RCU target port, or external port
• WWN: Displays WWNs of ports.
The table lists the following for iSCSI CHA packages:
• Port Name: Displays iSCSI port names
• IP Address: Displays the iSCSI port IP addresses
• Subnet Mask: Displays subnet masks
• Gateway: Displays gateway addresses
• iSCSI Name: Displays iSCSI port names
• iSCSI Alias: Displays iSCSI port aliases
• Port Number: Displays iSCSI port numbers
• Keep Alive Timer: Displays the keep-alive timer values in seconds
• INS Server: Indicates whether you can register the iSCSI port in the ISNS server
• Enable: You can register the iSCSI port
• Disable: You cannot register the iSCSI port
• iSNS IP Address: Displays the IP address of the ISNS server
• iSNS Port No: Displays the TCP port number of the iSNS server
• MAC Address: Displays the iSCSI port media access control (MAC) addresses
Table 13 Channel adapter package icons for Port operations
Icon Status
A short-wave CHA package in standard mode (Fibre Channel)
or
A short-wave iSCSI CHA package
A long-wave CHA package in standard mode
A short-wave CHA package in high-speed or high-speed (2 port) mode
A long-wave CHA package in high-speed or high-speed (2 port) mode
- HP StorageWorks 1
- Contents 3
- About this guide 9
- Related documentation 10
- HP technical support 10
- Subscription service 11
- LU configuration overview 13
- Supported emulation types 13
- LU paths 13
- Host storage domains 14
- 16-Port FC/CA CHIP product 16
- Host groups 17
- Host modes 18
- LUN Security 19
- RAID Manager command devices 20
- Fibre Channel port attributes 21
- ®, or HP-UX 11i 23
- EUI.02004567A425678D 24
- ® iSNS Server as the iSNS 24
- Host authentication 26
- LUN Manager operations 28
- LU Path tree 29
- Fibre Channel folder 29
- NAS folder 29
- Icon Status 30
- LU Path table 32
- WWN or iSCSI name table 32
- Defining LU paths 33
- Creating host groups 34
- Deleting LU paths 37
- Deleting host groups 38
- Defining alternate paths 41
- Viewing alternate paths 44
- Deleting WWNs 44
- Port Operations 45
- Port table 46
- Change Port Mode box 47
- Configuring iSCSI Ports 48
- (iSCSI environment only) 49
- User Authentication tab 50
- User Information (Port) table 51
- Operational restrictions 55
- Activity 57
- Drawbacks 59
- LUSE rules 59
- VSC operations 60
- Parity group configuration 61
- Volume to Space operation 62
- Restrictions 63
- LUSE operations 66
- Select an LDEV list 67
- Volume Count list 67
- Free LDEVs table 67
- Expanded LDEVs list 68
- Releasing a LUSE volume 70
- Changing LUSE capacities 70
- VSC Operations 71
- Parity Group - LDEV table 72
- Capacity unit list 73
- Formatting LDEVs 89
Relacionado con productos y manuales para Almacenamiento Hp StorageWorks XP Remote Web Console Software
(39 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.175 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales