Hp Tape Library Interface Manager Software Manual de usuario Pagina 51
- Pagina / 138
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 3 Management Operations 51
Chapter 3
Changing a Fibre Channel Interface Card Configuration Using Telnet
The Telnet interface can be used to change several parameters that control how
the Interface Manager performs tasks. These parameters are found in the Fibre
Channel Configuration menu.
To get to the Fibre Channel Configuration menu, do the following:
1. Log into the Interface Manager using a Telnet session as described in
Accessing Telnet on page 38.
2. Select [3] from the Main menu.
3. Select [2] from the Interface Card menu.
Choosing Which Card to be Configured
To choose which Fibre Channel interface card is to be configured, do the
following:
1. Select [1] from the Fibre Channel Configuration menu.
2. Enter the slot number of the card to be configured.
Note Slot number1 should contain the RMC (disregard the card type
number 2 on the card, the correct slot number is 1). Slot number
2 should contain the Controller card (disregard the card type
number 3 on the card, the correct slot number is 2). Interface
cards are in slots numbered 3 through 12.
Only the interface cards that are listed on the screen are valid
choices to be configured.
The parameters that can be changed include:
— the number of controller LUNs
— the port mode value (N_port vs. Auto-Sense),
— the initiator mode buffered tape writes,
— the ability to perform Auto-Indexed mapping.
- Part Number: C9578-90000 1
- Edition 1 1
- December 2001 1
- In this manual 2
- Warranty 3
- Reference Standards 4
- Chapter 1 Introduction 11 5
- Chapter 4 SAN Environments 77 8
- Introduction 11
- 12 Introduction Chapter 1 12
- Chapter 1 Introduction 13 13
- Processing SCSI Information 14
- Fibre Channel Features 15
- SCSI Bus Features 15
- Configuration Features 15
- Management Features 16
- Chapter 1 17
- Table 2 Supplied Components 18
- No. Item Qty Description 18
- Specifications 19
- Supported Products 20
- Chapter 1 Introduction 21 21
- Optical Fibre Channel Cables 22
- Interface Manager Overview 23
- Chapter 2 27
- Fibre Channel Port Mode 28
- Hard Addressing 29
- Soft Addressing 29
- Host Device Configuration 30
- SCSI Addressing 30
- Buffered Tape Writes 30
- Address Mapping 31
- Auto-Indexed Mapping 32
- Fixed-Indexed Mapping 32
- Configuration Methods 33
- Web Based Administrator 34
- Management Operations 35
- Management Interfaces 36
- Overview 38
- Accessing Telnet 38
- Chapter 3 41
- Table 7 Time Zones 41
- Using Your Own Settings 44
- Setting Date and Time 56
- Time Shown is NOT Correct 57
- Using DHCP 59
- Administrator 60
- Hard Address Settings 62
- Soft Address Settings 62
- Selecting Your Own Settings 63
- Using the Web Interface 72
- Upgrade Firmware Using FTP 74
- FTP Interface (Single Card) 75
- SAN Environments 77
- Chapter 4 79
- 80 SAN Environments Chapter 4 80
- Omniback Configuration 81
- 82 SAN Environments Chapter 4 82
- Chapter 4 SAN Environments 83 83
- Configuration on page 85 84
- HP-UX Configuration 85
- 86 SAN Environments Chapter 4 86
- Chapter 4 SAN Environments 87 87
- Stopping the dm_stape process 88
- 90 SAN Environments Chapter 4 90
- Chapter 4 SAN Environments 91 91
- file to 91
- Windows Configuration 92
- Solaris Configuration 94
- Switch Configuration 95
- 96 SAN Environments Chapter 4 96
- Troubleshooting 97
- Operation Indicators 99
- 100 Troubleshooting Chapter 5 100
- Chapter 5 Troubleshooting 101 101
- 102 Troubleshooting Chapter 5 102
- Basic Verification 103
- 104 Troubleshooting Chapter 5 104
- NT Control Panel 104
- Chapter 5 105
- 1. Execute an ioscan command 105
- Figure 29.) 105
- Figure 29 ioscan Sample 105
- 106 Troubleshooting Chapter 5 106
- Problem - Solution 107
- 108 Troubleshooting Chapter 5 108
- Chapter 5 Troubleshooting 109 109
- 110 Troubleshooting Chapter 5 110
- Chapter 5 Troubleshooting 111 111
- 112 Troubleshooting Chapter 5 112
- 114 Troubleshooting Chapter 5 114
- DB-9 Serial and RJ-45 115
- Ethernet Pin Assignment 115
- RJ-45 Pin Assignments 116
- Fibre Channel Interface and 117
- Commands 117
- ■ Byte 2 set to 0xFA 118
- Report LUNs Command 119
- PRLI Data 121
- SCSI Interface and Commands 123
- Customer Support 125
- Glossary 127 127
- 128 Glossary 128
- Glossary 129 129
- 130 Glossary 130
- Glossary 131 131
- 132 Glossary 132
- Glossary 133 133
- 134 Glossary 134
- Glossary 135 135
- World Wide Name 136
- Index 137 137
- 138 Index 138
Relacionado con productos y manuales para Almacenamiento Hp Tape Library Interface Manager Software
(132 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.045 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales