HP EliteDesk 800 G4 Base Model Small Form Factor PC Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 144
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
Hood lock
The hood lock is secured to the back of the computer.
1. Prepare the computer for disassembly (Preparation for disassembly on page 17).
2. Remove the access panel (Access panel on page 18).
3. Disconnect the cable from the system board connector labeled HLCK (1), and then remove the cable
from the clip on the fan duct (2).
4. Remove the screw that secures the hood lock to the rear of the computer (3), and then remove the hood
lock from the inside of the computer
(4).
To install the hood lock, reverse the removal procedure.
Hood lock 47
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 143 144

Comentarios a estos manuales

Sin comentarios