HP ProDesk 400 G4 Base Model Microtower PC Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 51
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Rear panel components
1 Audio-out jack for powered audio devices 5 USB 2.0 ports (4)
2 DisplayPort monitor connector 6 Audio-in jack
3 VGA monitor connector 7 RJ-45 (network) jack
4 USB 3.x ports (2) 8 Power cord connector
NOTE: An optional second serial port and an optional parallel port are available from HP.
If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the Wake from S4/S5
feature. The Wake from S4/S5 feature is also supported on the PS/2 connectors if enabled in BIOS F10 Setup.
When a device is plugged into the audio-in jack, a dialog box will open asking if you want to use the connector for a
microphone line-in device or a headphone. You can recongure the connector at any time by double-clicking the Audio
Manager icon in the Windows® taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and the
integrated graphics on the system board may be used at the same time. However, for such a conguration, only the display
connected to the discrete graphics card will display POST messages.
The system board graphics can be disabled by changing settings in Computer Setup.
Rear panel components 3
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

Comentarios a estos manuales

Sin comentarios