Hp ProLiant DL120 G6 Server Manual de usuario Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 113
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
Troubleshooting 53
Troubleshooting
Common problem resolution
Loose connections (on page 53)
Service notifications (on page 53)
Firmware updates (on page 53)
DIMM handling guidelines (on page 54)
SAS and SATA hard drive guidelines (on page 54)
Loose connections
CAUTION: If you are using a Virtual Connect environment, some of these procedures might
cause the loss of Virtual Connect credentials and the loss of communication between the Onboard
Administrator and the Virtual Connect Interconnect module. Ensure the Virtual Connect
configuration is backed up before proceeding with any of the following procedures. Virtual
Connect configuration can be backed up by using Virtual Connect GUI or Virtual Connect
Support Utility.
Action:
Be sure all power cords are securely connected.
Be sure all cables are properly aligned and securely connected for all external components.
Be sure each device is properly seated. Avoid flexing circuit boards when reseating components.
If a device has latches, be sure they are completely closed and locked.
Check any interconnect LEDs that might indicate a component is not connected properly.
If problems continue to occur, remove and reinstall each device, checking the connectors and sockets
for bent pins or other damage.
Service notifications
To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport). Select
the appropriate server model, and then click the Troubleshoot a Problem link on the product page.
Firmware updates
Download firmware updates from the following locations:
The HP Smart Components available on:
o The HP ProLiant Firmware Maintenance CD or DVD
o The HP Smart Update Firmware DVD
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 112 113

Comentarios a estos manuales

Sin comentarios